Joy LT-650

Joy Global Lt 650
Joy Global Lt 650

Contact Us

Please contact us using the contact phone, by phone or by e-mail:

Phone: (871) 750 5356 Torreón, Coahuila México

Phone: (472) 723 9494 Silao, Guanajuato México

The LT-650 hard rock loader is a diesel-powered heavy-duty machine intended for the most demanding mine environments. The LT-650 is designed for small- to medium-size openings for load-and-carry applications. The LT-650, like all Joy loaders, is designed specifically for ease of use and maintenance, with simple operation gauges and a rugged long-life structure, providing the lowest possible total costs of operation including low capital costs.

Designed for safe operation and maintenance

The LT-650 includes multiple features that are designed to maximize safety for both the operator and the maintenance staff:

  • ROPS/FOPS canopies and cabins provide protection from falling rock or rollovers
  • Fail-safe braking system features a spring-applied braking system that activates when low hydraulic oil pressure or electrical failures are detected
  • Operation interlocks prevent accidental machine activation
  • Three-point mounting and anti-slip steps minimize slips and falls
  • Hot component isolation to prevent burns

Designed for reliability

The LT-650 has been designed for reliability and long component life, including the following features:

  • Rugged steel frame
  • MIL (military specification) components that meet international standards
  • Heavy-duty all-mechanical powertrain featuring Dana components for a rugged platform and long service life
  • Hydraulic systems with piston pumps
  • Severe-duty electrical system
  • Collet-style pins for lower wear and reduced maintenance

Designed for ease of maintenance

The LT-650 includes several key features that reduce maintenance times and costs, including:

  • Ground-level maintenance design to eliminate climbing
  • Centralized lubrication system
  • Simple electrical design

Designed for productivity

The LT-650 has been designed to provide the highest possible productivity in its class:

  • Combines power and efficiency to provide fast tramming speeds and cycle times, with impressive breakout power
  • Easy-to-use controls are simple to train and simple to operate
  • Rugged structures and heavy-duty components increase equipment uptime

Designed for customization

The LT-650 has many options available, including:

  • FOPS/ROPS certified cab and/or canopy
  • Automatic lubrication system
  • Ejector bucket
  • Electric transfer pump (hydraulic tank)
  • Side dump bucket
  • Fire suppression system
  • Quick-attach coupling system
  • Radio remote control
  • Spare rim

Forks and an optional quick-attach coupler (which allows the bucket to be quickly replaced with forks) are available for utility applications. The buckets can be equipped with a variety of wear packages, depending on the application.


Tramming capacity 6,591 kg 14,500 lbs.
Hydraulic breakout force lift 11,531 kg 25,369 lbs.
Hydraulic breakout force tilt 16,398 kg 36,076 lbs.
SAE breakout force 9,860 kg 21,693 lbs.
SAE static tipping load 19,600 kg 43,120 lbs.
Bucket 3.1 m3 4.0 yd3

Overall dimensions

Height to top of canopy 2,164 mm 7 ft. 1.25 in.
Tramming length 8,947 mm 29 ft. 4.25 in.
Length: rear axle to bumper 2,838 mm 9 ft. 3.75 in.
Center hinge to rear axle 1,804 mm 5 ft. 11 in.
Center hinge to front axle 1,270 mm 4 ft. 2 in.
Reach 1,629 mm 5 ft. 4.25 in.
Height to top of hood 1,698 mm 5 ft. 6.75 in.
Height: ground clearance 217 mm 8.5 in.
Height: dump clearance 1,091 mm 3 ft. 7 in.
Height: bucket pin 2,609 mm 8 ft. 6.75 in.
Height: bucket raised 4,113 mm 13 ft. 6 in.
Width overall 2,033 mm 6 ft. 8 in.
Maximum width RF 1,997 mm 6 ft. 6.5 in.
Outside radius 6,514 mm R 21 ft. 4.5 in.
Inside radius 3,618 mm R 11 ft. 10.5 in.
Turn angle 36 degrees
Dump angle 40 degrees
Roll back angle 45 degrees