Joy LT-1050

Joy Gloal LT 650
Joy Gloal LT 650

Contact Us

Please contact us using the contact phone, by phone or by e-mail:

Phone: (871) 750 5356 Torreón, Coahuila México

Phone: (472) 723 9494 Silao, Guanajuato México

The LT-1050 hard rock loader, with a rated load capacity of 9,979 kg (22,000 lbs.), is ideal for medium-size openings for both load-and-carry and truck-loading applications. The LT-1050 is perfect for height-restricted areas and can be equipped with an optional ejector bucket. The LT-1050, like all Joy loaders, is designed specifically for ease of use and maintenance, with simple operation gauges and a rugged long-life structure, providing the lowest possible total costs of operation including low capital costs.
Designed for safe operation and maintenance
The LT-1050 includes multiple features that are designed to maximize safety for both the operator and the maintenance staff:

  • ROPS/FOPS canopies and cabins provide protection from falling rock or rollovers
  • Fail-safe braking system features a spring-applied braking system that activates when low hydraulic oil pressure or electrical failures are detected
  • Operation interlocks prevent accidental machine activation
  • Three-point mounting and anti-slip steps minimize slips and falls
  • Hot component isolation to prevent burns

Designed for reliability
The LT-1050 has been designed for reliability and long component life, including the following features:

  • Rugged steel frame
  • MIL (military specification) components that meet international standards
  • Heavy-duty all-mechanical powertrain featuring Dana components for a rugged platform and long service life
  • Hydraulic systems with piston pumps
  • Severe-duty electrical system
  • Collet-style pins for lower wear and reduced maintenance

Designed for ease of maintenance
The LT-1050 includes several key features that reduce maintenance times and costs, including:

  • Ground-level maintenance design to eliminate climbing
  • Centralized lubrication system
  • Simple mechanical design

Designed for productivity
The LT-1050 has been designed to provide the highest possible productivity in its class:

  • Combines power and efficiency to provide fast tramming speeds and cycle times, with impressive breakout power
  • Easy-to-use controls are simple to train and simple to operate
  • Rugged structures and heavy-duty components increase equipment uptime

Designed for customization
The LT-1050 has many options available, including:

  • FOPS/ROPS certified canopy
  • FOPS/ROPS certified enclosed operator’s cab with air conditioning and/or heat
  • Automatic lubrication system
  • Ejector bucket
  • Electric transfer pump (hydraulic tank)
  • Fire suppression system
  • Radio remote control
  • Spare rim

Forks and an optional quick-attach coupler (which allows the bucket to be quickly replaced with forks) are available for utility applications. The buckets can be equipped with a variety of wear packages, depending on the application.


Tramming capacity 9,979 kg 22,000 lbs.
Hydraulic breakout force lift 20,154 kg 44,433 lbs.
Hydraulic breakout force tilt 15,698 kg 34,609 lbs.
SAE breakout force 17,434 kg 38,435 lbs.
SAE static tipping load 33,299 kg 73,411 lbs.
Bucket 4.6 m3 6.0 yd3

Overall dimensions

Height to top of canopy 2,447 mm 8 ft.
Tramming length 9,476 mm 31 ft. 11 in.
Length: rear axle to bumper 3,060 mm 10 ft.
Center hinge to rear axle 2,030 mm 7 ft. 6 in.
Center hinge to front axle 1,591 mm 5 ft. 2 in.
Reach 1,728 mm 5 ft. 8 in.
Height to top of hood 1,901 mm 6 ft. 3 in.
Height: ground clearance 423 mm 1 ft. 5 in.
Height: dump clearance 1,471 mm 4 ft. 10 in.
Height: bucket pin 3,138 mm 10 ft. 3 in.
Height: bucket raised 4,978 mm 16 ft. 4 in.
Width overall 2,685 mm 8 ft. 9 in.
Maximum width RF 2,201 mm 7 ft. 3 in.
Outside radius 6,765 mm R 22 ft. 2 in.
Inside radius 3,468 mm R 11 ft. 5 in.
Turn angle 42.5 degrees
Dump angle 45 degrees
Roll back angle 47 degrees